La Marzocco Linea PB Manual Download Page 81

Page: 81 / 112

Display

Operating Procedure

Description

Programming Mode

“Technical” Programming

Tea Dose

Tea Dose
Settings

• This parameter allows the operator to

program the amount of water (brewing
amount) for the tea button.

• This feature can be enabled or disabled.

Press the T3 button

to return to the “Technical” programming.

Press T1

or T2

to continue with the programming of the other parameters.

To exit the menu move between the parameters using the buttons T1

and T2

until the exit menu

is displayed. Press the T3 button

to exit the menu and return to the normal use of the espresso machine.

Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine
by pressing T2

and T3

at the same time.

LaMarzocco 00:00

CB 93.8

C SB

Tea Dose

Exit

Summary of Contents for Linea PB

















































































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands