La Marzocco Linea PB Manual Download Page 29

Page: 29 / 112

Display

Operating Procedure

Description

Programming Mode

Accessing Programming Mode

• To change the values of any parameter

the operator must first enter into the

programming mode.

• There are two levels within the

programming mode that allow the

programming of specific parameters.

• The two programming levels are as

follows:

•

Barista Programming - The parameters

contained within this level are ones

the operator can change to affect the

quality of the espresso.

No password is required for access.

•

Technical Programming - The parameters

contained within this level are ones

the operator can change to affect the

performance of the espresso machine.

These parameters are set in the factory

and their adjustment requires the

intervention of a service technician La

Marzocco reccomends that no changes

are made at this level. The Technician

Password is required for access.

Programming Mode

LaMarzocco 00:00

CB 93.8

C SB

“Barista” Programming Level

While the espresso machine is on, press and hold the button T3

. After approximately 5 seconds the

following display appears.

This is the “Barista” programming level. To program the brewing amount for each button, to set the coffee

boilers, the pre-infusion, and to enable/disable the resistance of the cup warmer if present.

To exit the programming mode, scroll to the exit menu, using the buttons T1

or T2

. Press the

button to confirm the exit, or press at the same time the buttons T2 and T3.

“Technical” Programming Level

While the espresso machine is on, press and hold the button T3

. After approximately 10 seconds the

following display appears.

This is the “Technical” programming level. Enter the password and press the buttons T1

and T2

to move between the available parameters, press the T3 button

to confirm.

Note: You must scroll to the exit menu to exit the programming mode, or press at the same time the buttons

T2 and T3.

LaMarzocco 00:00

CB 93.8

C SB

Program

Dose

LaMarzocco 00:00

CB 93.8

C SB

Press Enter

To Exit

Enter Password

Summary of Contents for Linea PB

















































































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands