EN
65
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
(only on ABR espresso machine models)
“Technical” Programming
After accessing the “Technical” programming menu and entering the password, use the buttons T1
and T2
until the following screen is displayed.
Press the T3 button
to enter the doses programming procedure.
Press the T3 button
to start the doses programming procedure.
On each button you can set two doses, one for a short shot, one for a long shot.
To set the brewing weight of a short shot, press and release the button immediately, press again to stop and
store the desired dose.
To set the brewing weight of a long shot, press and hold the button for about 2 seconds, press and release the
button immediately to store the desired dose.
The two doses of each key can be set independently from one another.
• This parameter allows the operator to
program the amount of coffee (brewing
weight) for each button on the keyboard.
• Once programmed, the button remains
lighted.
• It is possible to set the dose for both a
short and a long shot on the same key.
• It is possible to copy the doses of any
key to the others.
Group Dose
Settings
1
2
3
4
Group Dose
Settings
LaMarzocco 00:00
CB 93.8
°
C SB
Push To Stop
20.0g
Press Enter
To Exit
G1B1 Saved
20.0g
Program
Volume dose
Program Dose
Scales
Summary of Contents for Linea PB
Page 111: ...EN 111 ...
Page 112: ......
