EN
26
Display
Operating Procedure
Description
Programming Mode
First Use Procedure
Turning the Espresso
Machine On
Turn the Main Switch to the 1 position.
To continue with the start up process, press the T3 button
after filling the steam boiler.
To continue with the start up process, press the T3 button
after the saturation of the coffee boiler.
The rectangles next to CB and SB indicate the warming up of the water contained in the boilers. When the set
temperature is reached, these rectangles turn off and all the lights of the buttons turn on. Now the machine
is ready for use. During the normal operation of the machine, the flashing of the rectangles indicates the
intermittent heating necessary for maintaining the temperature.
NOTE:
Ensure all air is removed from the group prior to staring the espresso machine.
This only needs to be completed once during the initial setup or when water is drained from the coffee boiler.
Instructions for bleeding the groups of air can be found in the Installation Guide.
HAZARDOUS VOLTAGE DISCONNECT FROM POWER
SUPPLY BEFORE SERVICING
WARNING
The following is the procedure to be
followed for the first use of the espresso
machine.
• Please follow the procedures carefully
to avoid any damage to the espresso
machine.
• Proceed checking for water connection
to the espresso machine.
• Proceed making sure you have filled the
boilers.
• For the MP version, ongoing warming is
indicated by the timer located on the
groups using digit rotation.
SB FILLED?
OFF
00:00
GROUPS BLED?
LaMarzocco 00:00
CB
O
93.8
°
C SB
O
1
3
1
2
4
Summary of Contents for Linea PB
Page 111: ...EN 111 ...
Page 112: ......
