EN
79
Display
Operating Procedure
Description
Programming Mode
(only on ABR espresso machine models)
“Technical” Programming
• This parameter enables the technician
to set some scale parameters like:
-
Enabling/disabling
the
offset
parameter;
- Setting the weight reading time;
- Calibrating the scales;
- Updating the scale software.
Scales
Configuration
Program Scales
Press the T3 button
to start the calibration procedure.
Remove any object from the scale, then press the T3 button
to confirm.
Place the reference weights onto the scale, then press the T3 button
to confirm. At the end of the process,
the self-calibration values or a confirmation message are displayed.
Repeat this operation for each group.
Press T2
to proceed with setting and press the T3
button to update the scale firmware if necessary.
To exit the submenu move between the parameters using the buttons
T1
and T2
until the exit
submenu is displayed. Press the T3 button
to exit the submenu.
Press
T1
or T2
to continue with the programming of the other parameters.
To exit the menu move between the parameters using the buttons
T1
and T2
until the exit menu is
displayed. Press the T3 button
to exit the menu and return to the normal use of the espresso machine.
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine
by pressing T2
and T3
at the same time. It is advisable to turn off and on the espresso machine.
Calibrate
Scales
Empty G1 Scale
And Press Enter
Place 100g on G1
And Press Enter
6
Scale Settings
Exit
8
10
11
LaMarzocco 00:00
CB 93.8
°
C SB
7
G1 Scale: v0.0.0
Upgrade to 1.0.0
Exit
Menu
9
Summary of Contents for Linea PB
Page 111: ...EN 111 ...
Page 112: ......
