EN
61
Display
Operating Procedure
Description
Programming Mode
“Technical” Programming
(available up to the 1.6.3 software version)
“Technical” Programming
After accessing the “Technical” programming menu and entering the password, use the buttons T1
and T2
until the following screen is displayed.
Press the T3 button
to enter the doses programming procedure.
Press the T3 button
to start the doses programming procedure.
To program the coffee brewing time, press the dose button to start and then press it again to stop, once the
desired dose is achieved. Successful programming is indicated by the lighting of the button. This operation
must be repeated for each button whose dose you want to set. The buttons can be programmed in any sequence.
Press the T3 button
to return to the doses programming.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each button on the
keyboard.
• The brewing amount can be set in terms
of time (sec. ) or pulses. This number
refers to the number of pulses that the
flowmeter sends to the CPU.
• Once programmed, the button remains
lighted.
Group Dose
Settings
Group Dose
Settings
LaMarzocco 00:00
CB 93.8
°
C SB
Program Dose
Press b To Stop
10 pulses
Press Enter
To Exit
G1B1 Saved
10 Pulses
Program
Volume Dose
Press Enter
To Exit
1
2
3
4
5
Summary of Contents for Linea PB
Page 111: ...EN 111 ...
Page 112: ......
