8510 Capabilities
STE User’s Manual
9-20
Rel. 2.6
for annunciation. In this case, the last call appearance value to be programmed into the STE
would be 5.
•
Message waiting may be visual, audible (stutter dial tone), or both depending the customer’s
requirements. Message waiting must be assigned to key 63.
9-7.3 DEFINITY
Configuration
To configure the ISDN line for use with STE-8510, the local plant switch administrator must be contacted
to provide the proper ISDN line and features needed by you. The next sections discuss the proper ISDN
line configuration for the switch, selecting and configuring features on the switch and configuring the STE
to work properly with the switch configuration.
9-7.3.1 DEFINITY
Switch
Configuration
The STE-8510 switch type setting should only be used when shared call appearances, intercom, visual
message waiting indicator or other special features are required that are supported only under STE-8510.
To configure a line from a DEFINITY switch to work with the STE, the following information must be
provided to the switch administrator to ensure proper operation.
The following figures (
) show typical displays captured from an AVAYA®
DEFINITY switch running Version 11 software. These displays show the proper configuration of an
8510T station to work with a STE set to the STE-8510 switch type setting. The line shown has an Audix
Coverage Path (Coverage Path 1), a Data Module, Ring Preference, and an audible message waiting
indication in addition to a message lamp for the extension. There is only one SPID (5212) for both voice
and data modules, which should be programmed into the STE for Service Profile ID (SPID) #1. Service
Profile ID (SPID) #2 should remain empty. There are two directory numbers assigned to the terminal.
The voice number is 5212 and the data number is 5712. Only the voice directory number (5212) should
be programmed into the STE as Directory Number #1. Directory Number #2 should also remain empty.
Two Abbreviated Dialing lists are configured, one for personal and one for group. There are four call
appearances, one of which is bridged to extension 5211 and Bridged Call Alerting is enabled.
provides the first page of the DEFINITY configuration screen. In addition to the Extension,
Port and Name, the following information must be entered to ensure proper STE-8510 operation.
Figure 9-14. DEFINITY 8510 Station Page 1
Summary of Contents for CEU
