L-3 Communications CEU, User Manual

Page: 7 / 312

STE User’s Manual Preface
Rel. 2.6 e
•
G.729D Secure Dial & Remote Control
•
International PSTN (Software Only)
•
NP RAM update (to support IP STE)
•
Speaker Phone Volume
•
STE Secure Dial
•
Tactical FNBDT and Tactical STE-R (non T1 IWF support)
•
Release 2.4
•
Expanded Encrypted Packet for Capability Message VI
•
Displayed Security Level Control
•
V.44 Data Compression
•
Modem Improvements
•
Signaling Mode Selection
•
Tactical FNBDT (IWF)
•
Enclave Operation
•
Constrained Rekey
•
Release 2.5
•
V.34 Modem
•
STE-R Remote Panel Operation (Local Control at a Distance)
•
Updated Hardware
•
Introduces the term SCIP which will eventually replace the term FNBDT
•
Release 2.6
•
Enhanced Firefly (EFF) in addidtion to Basic Firefly (BFF) functionality
•
Version 1 (V1) Mode Change functionality
•
ISDN Echo Cancellation Control
Software Versions are shown in
Table 4-2 .
NOTE
The typographic conventions used in this manual include using San Serif fonts as
follows:
•
Sans Serif font, such as this, is used for all normal text.
•
SAN SERIF BOLD , uppercase, such as this, is used to identify interface
ports and control keys, except the Soft Keys.
For example: When addressing the ISDN Interface Port, it would be shown
as
ISDN PORT . When addressing a control key or an operator action is
required, such as pressing the key, it would be shown as MENU .
•
SAN SERIF, all uppercase, such as this, is used to show the information
presented in the Liquid Crystal Diode (LCD) Displays.
For example: The first line in the display would be shown as “LINE 1
(DISPLAY NAME).”
•
SAN SERIF ITALIC , all uppercase, such as this, is used to identify a Soft
Key Functional Name. For Example: When addressing the Soft Key
Functional Name or an operator action is required, such as pressing the
key, it would be shown as
SELECT .