L-3 Communications CEU, User Manual

Page: 74 / 312

Installation STE User’s Manual
2-42 Rel. 2.6
Figure 2-64. TERMINAL MANAGEMENT Menu
2. Press SELECT to display the NETWORK SETTINGS menu ( Figure 2-65 ).
Figure 2-65. NETWORK SETTINGS Menu
3. With the NETWORK SETTINGS menu displayed, press SELECT to advance to the ACTIVE
NETWORK PORT menu ( Figure 2-66 ).
Figure 2-66. ACTIVE NETWORK PORT: BDI-232
4. The ACTIVE NETWORK PORT display shows the service selected as the active port - ISDN,
PSTN, TRI-TAC, BDI 530A, or BDI 232 port. The default setting is ISDN and must be changed.
To change the service, press
CHANGE until the correct service is shown in the display. Select
either BDI-232 or BDI-530A.
5. With your BDI set, you will press SCROLL (once) to advance to the NETWORK RATE menu
(Paragraph 2-8.3 ).
6. Press BACK to return the display to the NETWORK SETTING menu ( Figure 2-65 ).
2-8.3 Set NETWORK RATE
The NETWORK RATE menu ( Figure 2-67 ) shows the data communications rate – 2.4 Kbps, 4.8 Kbps, or
9.6 Kbps set in the STE. The default setting is 9.6 Kbps.
Figure 2-67. NETWORK RATE Menu
1. To change the rate, press CHANGE to toggle between 2.4 kbps, 4.8 kbps or 9.6 kbps.
2. With the NETWORK RATE setting made, press SCROLL (once) to advance to the DCE READY
menu (Paragraph 2-8.4 ).
3. Press BACK to return the display to the NETWORK SETTINGS menu ( Figure 2-65 ).
TERMINAL MANAGEMENT
SCROLL BACK
SELECT
NETWORK RATE: 9.6 Kbps
SCROLL BACK CHANGE
NETWORK SETTINGS
SCROLL BACK SELECT
ACTIVE NETWORK PORT: BDI-232
SCROLL BACK CHANGE