L-3 Communications CEU, User Manual

Page: 46 / 312

Installation STE User’s Manual
2-14 Rel. 2.6
Setting Default
Feature Code
Transfer Feature Code (set from Table 2-14 ) 061
Conference Feature Code (set from Table 2-14 ) 060
Drop Feature Code (set from Table 2-14 ) 062
Advanced Terminal Settings for Installation Personnel
STU-III ACK/NAK Enabled
STU/SCIP Extended Timeout 0
STE Extended Timeout 0
Fade Timeout 10
Initiate Direct Dial Disabled
Initiate STE on Voice Bearer Enabled
STE-210 Receive Secure Dial Enabled
1. At either the physical or the virtual Front Panel, press MENU and observe that the TERMINAL
MANAGEMENT menu ( Figure 2-6 ) is presented.
Figure 2-6. TERMINAL MANAGEMENT Menu
2. In the TERMINAL MANAGEMENT menu, press SELECT to advance to the NETWORK
SETTINGS menu ( Figure 2-7 ).
Figure 2-7. NETWORK SETTINGS Menu
3. With the NETWORK SETTINGS menu displayed, press SELECT to advance to the ACTIVE
NETWORK PORT menu ( Figure 2-8 ).
Figure 2-8. ACTIVE NETWORK PORT: ISDN Menu
4. The ACTIVE NETWORK PORT display shows which of the five configurable services is selected
as the active port - ISDN, PSTN, TRI-TAC, BDI 530A, or BDI 232. The default setting is ISDN.
5. If ISDN is not showing in the display, press CHANGE until it shows in the display.
ACTIVE NETWORK PORT: ISDN
SCROLL BACK
CHANGE
NETWORK SETTINGS
SCROLL BACK SELECT
TERMINAL MANAGEMENT
SCROLL BACK SELECT