L-3 Communications CEU, User Manual

Page: 69 / 312

STE User’s Manual Installation
Rel. 2.6 2-37
Figure 2-54. TERMINAL MANAGEMENT Menu
2. Press SELECT to advance to the NETWORK SETTINGS menu ( Figure 2-55 ).
Figure 2-55. NETWORK SETTINGS Menu
3. With the NETWORK SETTINGS menu displayed, press SELECT to advance to the ACTIVE
NETWORK PORT menu ( Figure 2-56 ).
Figure 2-56. ACTIVE NETWORK PORT: TRI-TAC
4. The ACTIVE NETWORK PORT display shows the service selected as the active port - ISDN,
PSTN, TRI-TAC, BDI 530A, or BDI 232. The default setting is ISDN and must be changed. To
change the service, press
CHANGE until TRI-TAC is displayed.
5. After setting your ACTIVE NETWORK PORT to TRI-TAC, next, you will press SCROLL (once) to
advance to the ADVANCED TERMINAL SETTINGS FOR INSTALLATION PERSONNEL menu
(Paragraph
2-7.3 ).
6. Press BACK to return the display to the NETWORK SETTINGS menu ( Figure 2-55 ).
2-7.3 ADVANCED TERMINAL SETTINGS FOR INSTALLATION PERSONNEL
(TRI-TAC)
The Advanced Terminal Settings for Installation Personnel menu is shown in Figure 2-57 .
Figure 2-57. ADVANCED TERMINAL SETTINGS FOR INSTALLATION PERSONNEL Menu
In the ADVANCED TERMINAL SETTINGS FOR INSTALLATION PERSONNEL,
1. Press SELECT to advance to the STU-III ACK/NACK menu (Paragraph 2-7.3.1 ) shared by all
services.
TERMINAL MANAGEMENT
SCROLL BACK SELECT
NETWORK SETTINGS
SCROLL BACK
SELECT
ACTIVE NETWORK PORT: TRI-TAC
SCROLL BACK CHANGE
ADVANCED TERMINAL SETTINGS
FOR INSTALLATION PERSONNEL
SCROLL BACK SELECT