Kyocera 358ci, Operation Manual

Page: 617 / 661

11-4
Appendix > Optional Equipment
(1) DP-5100 "Document Processor (Reverse Automatic)"
DP-5120 "Document Processor (Dual Scan)"
DP-5130 "Document Processor (Dual Scan with Skewed and Multifeed Detection)"
Automatically scans originals. Also you can perform duplex copying and split copying.
For document processor operation, refer to the following:
Loading Originals in the Document Processor (page 5-3)
When the document processor is not used, please use the PLATEN COVER TYPE E.
(2) MT-5100 "Mailbox"
Makes it easy to sort output into separate trays. Installing this option adds 6 output trays. When multiple computer users
share the printer, each user can print to a specified tray.
(3) DF-5110 "1,000-Sheet Finisher"
This is a document finisher capable of holding large print runs and of separating and offsetting multiple copies of a
printout into individual copies. It can also staple or hole-punch (optional) the offset printouts.
(4) DF-5120 "3,000-Sheet Finisher"
This is a large-capacity 3,000-Sheet Finisher capable of holding large print runs and of separating and offsetting multiple
copies of a printout into individual copies. It can also staple or hole-punch the offset printouts.
(5) PF-5130 "Paper Feeder (500-sheet × 2)"
Two additional cassettes identical to the printer's cassette can be installed in the printer. Paper capacity and loading
method are the same as the standard cassettes.
Loading in the Cassettes (page 3-5)
(6) PF-5140 "Large Capacity Feeder (2,000-sheet)"
In addition to the printer's cassettes, you can also install an optional large capacity feeder (2,000-sheet) capable of
holding up to 2,000 sheets of A4, B5 or Letter paper.
Loading in the Large Capacity Feeder (page 3-9)
(7) PF-5120 "Paper Feeder (500-sheet)"
One additional cassettes identical to the printer's cassette can be installed in the printer. Paper capacity and loading
method are the same as the standard cassettes.
Loading in the Cassettes (page 3-5)
NOTE
To deliver output to the mail box, change the Paper Output selection on the operation panel or in the printer driver, or
change in the default settings.
Paper Output (page 6-30)