Kyocera 358ci, Operation Manual

Page: 481 / 661

9-18
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Server Settings
Set the server type when network authentication is enabled.
1
Display the screen.
1
[ System Menu/Counter ] key > [ Job Accounting/Authentication ]
2
Select "User Login Setting" [ User Login ] > [ Network Authentication ]
2
Configure the settings.
1
Select [ NTLM ], [ Kerberos ] or [ Ext. ] as the server type and enter the host name (256
characters or less) for the Authentication Server.
When selecting [
Ext. ] as the server type, enter the port number.
2
Select [ OK ].
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login ]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
NOTE
• Selecting [ Add/Edit/Delete Domain ] displays the domain registration list. In the
domain registration list screen, select [ Add/Edit ], and enter the domain name. Up to
10 domain names can be registered.
• If two or more domains are registered, select [ Default Domain ] and select the default
domain.
NOTE
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000