Kubota U50-5, Operating Instructions Manual

Page: 226 / 236

224
W9272-8135-1
05/2020
Taking out of service and storage
Start-up after taking out of service

If necessary, clean the machine thoroughly (page 181).

Check the hydraulic oil for condensate water. Replace the oil if necessary (page 202).

Remove the grease from the piston rods of the hydraulic cylinders.

Install the battery (page 207).

Check the safety devices for proper operation.

Carry out the pre-operational services (page 83). If failures are detected during start-up, repair the failures
before proceeding..

If the safety inspection is due while the vehicle has been taken out of service, the inspection must be per-
formed before start-up.

Start the engine (page 96). Run the machine at idle and check all functions.