Kubota U50-5, Operating Instructions Manual

Page: 126 / 236

124
W9272-8135-1
05/2020
Operation
AUX port 1
The following figure illustrates the auxiliary port 1 and auxiliary port 1 rocker switch (3) connectors.

Move the auxiliary port 1 rocker switch in direction ( ). The oil
will flow towards connector (1) on the right-hand side of the
arm.

Move the auxiliary port 1 rocker switch in direction ( ). The oil
will flow towards connector (2) on the left-hand side of the arm.
AUX port 2 (optional)
The following figure illustrates the auxiliary port 2 and auxiliary port 2 rocker switch (6) connectors.

Move the auxiliary port 2 rocker switch in direction ( ). The oil
will flow towards connector (4) on the right-hand side of the
arm.

Move the auxiliary port 2 rocker switch in direction ( ). The oil
will flow towards connector (5) on the left-hand side of the arm.
The auxiliary port function is only available when the
control lever lock is lowered. If the control lever lock is
raised or it is raised during the operation of the auxil-
iary port, then auxiliary port operation is not possible.
The message appears as in the figure on the right.
- Lower the control lever lock and press the aux-
iliary port enable switch once again.
The proportional control enables you to smoothly con-
trol the implement speed. Example: If you move the
rocker switch half a turn to the left, the implement
moves at half speed.
The proportional control enables you to smoothly con-
trol the implement speed. Example: If you move the
rocker switch half a turn to the left, the implement
moves at half speed.
1
2
1 2
3
4 5
4 5
6