Kubota U50-5, Operating Instructions Manual

Page: 57 / 236

Assembly and functions
W9272-8135-1
55
05/2020
Description of the components of the left control console
1. Control lever lock
To enter and leave the cab, the console must be raised by pulling up the control lever lock. The engine can
only be started if the console is raised. The hydraulic functions of the control lever, the drive lever, the boom
swing pedal, the dozer control lever and the auxiliary port are locked.
2. Rocker switch for auxiliary port 2 (optional)
The rocker switch for auxiliary port 2 controls the oil flow to auxiliary port 2. Turning the rocker switch to the
left causes the oil to flow towards the connector on the left-hand side of the arm. Turning the rocker switch to
the right causes the oil to flow towards the connector on the right-hand side of the arm. Auxiliary port 2 can
be controlled proportionally (infinitely variable).
3. Wrist rest
The wrist rest allows fatigue-free operation of the control lever.
4. Left control lever
The left control lever is used to move the swivel frame and the
arm.
The figure, in conjunction with the following table, shows the
functions of the left control lever.
Position of control lever Movement
1
Arm dump
2 Arm crowd
3 Swivel frame to the left
4 Swivel frame to the right
1 1
3 3
2 2
4 4
KX060-05_023