Kubota U50-5, Operating Instructions Manual

Page: 139 / 236

Operation
W9272-8135-1
137
05/2020
Operating the wiper/washer system
All cab models are equipped with a wiper/washer system.
Switching on the windscreen wiper

The starter switch is in the RUN position.

Press the switch (1) to activate the windscreen wiper.
Pressing once: The wiper activates itself intermittently. The upper
indicator (2) will light up.
Pressing twice: The wiper activates itself continuously. The lower
indicator (3) will light up.
Pressing three times: The wiper stops itself. The indicators (2) and
(3) will go out.
To turn on the washer system
Press the switch (1) to activate the washer system.
The washer system runs for as long as the switch is held down. The
indicator (2) lights up. Hold down the switch longer, and the wiper
will get started. Release the switch, and the wiper will swing several
times and stop itself.
Risk of damage to components!

When you turn on the wiper while the windscreen is opened, the wiper can hit the adjacent cab com-
ponents causing damage to the wiper.
- Do not turn on the wiper switch while the windscreen is open.
In extremely cold weather conditions, make sure the wiper rubber does not stick to the window. This
can damage the wiper rubber or the wiper motor.
Only switch on the wiper when the window glass is wet. If necessary, switch on the washer system
first.
Do not operate the washer system if its reservoir is
empty as running dry could damage the pump.
2 2
1 1
3 3
KX060-05_081
2 2
1 1
KX060-05_082