Kubota U50-5 Operating Instructions Manual Download

Page: 183 / 236

Maintenance

W9272-8135-1

181

05/2020

Cleaning the machine

The machine can be cleaned with water and a commercial cleaning agent. Make sure no water gets into the elec-
trical system.

Use a plastic cleaner for plastic parts.

Before cleaning, make sure to tape the air inlet for the air-conditioner and heater system at the swivel frame.

Before cleaning, shut down the engine and secure it against starting.

If a steam cleaner is used for cleaning the machine, do not direct the steam jet at electric components.

Do not direct a water jet into the intake opening of the air filter.

Do not clean the machine with inflammable liquids.

The machine may only be washed at suitable places (using oil and grease separators).

STOP

Summary of Contents for U50-5













































































































































































































































Search results

Summary of Contents for U50-5

Reviews:

Related manuals for U50-5

Brands by name

Popular brands

Kubota U50-5, Operating Instructions Manual

Search results

Summary of Contents for U50-5

Reviews:

Related manuals for U50-5

Brands by name

Popular brands