Operation
W9272-8135-1
105
05/2020
Automatic particle filter regeneration - Procedure
The following conditions have to be met for carrying out automatic regeneration.
1.
The automatic particle filter regeneration is released (1).
2.
The engine coolant should be at operating temperature.
3.
The engine speed should be the speed such the “Raise engine
speed” indicator and message disappear.
Various messages are shown in the display during the regeneration
process. In addition, the yellow or red warning light (1) flashes de-
pending on the relevance of the message.
When the particle filter regeneration starts, a message appears in
the display as shown in the figure on the right. In addition, the yellow
warning light flashes and an audible signal is emitted every 60 sec-
onds.
The exhaust temperature will increase significantly during particle
filter regeneration. However, the machine can continue to be oper-
ated.
Make sure that no people, animals, plants and/or flammable materials are within the immediate working area!
If the engine speed is too low, the message in the display changes
every 3 seconds, as shown in the figure on the right. In addition, the
yellow warning light flashes and an audible signal is emitted every
60 seconds.
Raise the engine speed until the “Raise engine speed” indica-
tor and message disappear.
The particle filter is regenerated.
KX060-05_067
1
1
Summary of Contents for U50-5
