Kubota U50-5, Operating Instructions Manual

Page: 174 / 236

172
W9272-8135-1
05/2020
Maintenance
Repair work on the machine
Repairs on the machine may only be carried out by trained personnel.
If repairs are carried out on load supporting parts, for example welding on frame parts, the work has to be checked
by a qualified person.
After repairs, the machine should be operated only if it is functioning properly. For this check particular attention
must be paid to the repaired parts and the safety devices.
Maintenance intervals
Maintenance interval display
10 hours before a certain service interval is due, the respective
maintenance interval is already indicated on the display.
The adjacent figure shows the “Periodic check soon” message.
Once the time for a service interval has been reached or exceeded,
the “Periodic check notification” message appears on the display.

Press menu switch on dial switch.
The menu bar appears in the display.

Rotate the jog dial to the right, until “Periodic check” is selected
in the display.

Press Jog dial (enter switch).