Operation
W9272-8135-1
111
05/2020
Driving the machine
Adhere to the general safety rules (page 13) and the safety rules for operation (page 73).
Carry out the pre-operational services (page 83).
Start the engine (page 96).
Observe the displays and indicators (page 100).
When working on slopes, observe the tilt of the machine.
Max. lateral sway
27 % resp. 15°
Climbing performance
36 % resp. 20°
Keep the bucket as low as possible when driving.
Check the ground for stability, and verify if there are holes or
other potential obstacles.
Approach overhangs and edges of ditches carefully as they
could cave in.
Drive slowly downhill, do not allow the vehicle speed to in-
crease uncontrollably.
Close the cab door.
When driving, the bucket should be approx. 200 to 400 mm (A)
over the ground (see figure).
Ensure that the boom and the dozer are in the direction
of travel as shown in the figure.
When driving with the machine, always observe the
following safety instructions.
Direction of travel
STOP
Summary of Contents for U50-5
