Kubota U50-5, Operating Instructions Manual

Page: 175 / 236

Maintenance
W9272-8135-1
173
05/2020
The list of “Periodic check” check points appears in the display .

To rotate jog dial can be used to scroll up and down through the
list of maintenance points.
The maintenance points illustrated in the following table are set in the service period indicator.
The maintenance tasks denoted with  must be carried out once the specified hours of operation after initial com-
missioning have been reached.
No. Maintenance point Task
Elapsed hours of operation
Interval
50 100 250 500 600 750 1000 1500 2000 3000
1 Engine oil Change
    
500 h
2 Fuel filter Change
    
500 h
3 Engine oil filter Change
    
500 h
4 Breather filter Change
    
500 h
5 Drive unit oil Change
     
500 h
6 Hydraulic oil Change
  
1000 h
7 Air filter element Change
  
1000 h
8 Return Filter Change
  
1000 h
9 Suction filter Change
  
1000 h
10 Pilot circuit filter Change
  
1000 h
11 Oil separator element Change
 
1500 h
12 Oil in idler and track roller Change

2000 h
The machine’s engine features an exhaust purification system. The engine must be operated, used
and serviced according to the following provisions in order to maintain the emission performance.
- Only use the fuel recommended in these operating instructions.
- Only use the engine oil recommended in these operating instructions.
- Service the engine according to the intervals recommended in these operating instructions.
- Replace the engine-related components according to the intervals recommended in these op-
erating instructions.