Kubota U50-5, Operating Instructions Manual

Page: 202 / 236

200
W9272-8135-1
05/2020
Maintenance
Suction filter - change

Open the side cover (page 155).

Unscrew the cap nut (3).

Push the button (4) to release pressure.

Reinstall the cap nut.

Drain the hydraulic oil (page 203).

Remove the return filter from the hydraulic oil tank (page 197).

Remove the screws (1).

Remove the hydraulic oil tank cover (2).
While replacing the hydraulic oil and the suction filter, be careful not to allow dust or dirt into the hy-
draulic oil tank.
Always remove spilled hydraulic oil immediately.
Pay attention to utmost cleanliness when servicing the hydraulic system.
Risk of injury by hot pressurized hydraulic oil! This service may only be carried out after the hydraulic
oil has cooled down. Then release pressure.
The suction filter must be replaced along with the hydraulic oil.
STOP
3 3
4 4
1 1
2 2