Kinco CD420, User Manual

Page: 24 / 108

24
5.1.4 Diagram of Trial Operation
5.1.1 Diagram of trial operation
Press MODE
F000
Enter the list of driver
instructions
Press ENTER
d0.02
Choose speed instructions
Set target speed (Unit: RPM)
(Refer to the example of setting the speed)
Press MODE
F006
Enter the trial operation
—Press ▼ to change d6.40 to d6.31 (press ▼ again
to change to d6.15); press ▲ to change to d6.25
Activate trial operation
Numeric display is ―abc.d‖
Long press ▲ or ▼
The motor works at the set target speed. Long pressing ▲
indicates that the motor works in the counterclockwise (positive)
direction; and long pressing ▼ indicates that the motor works in
the clockwise (negative) direction.
d4.18
Check motor types
Press MODE
F004
Press ENTER
Enter the list of motor parameters
Both positive and negative
speed can be set
Pre
ss ENTER
T
est on keys