Kinco CD2S Series, User Manual

Page: 73 / 111

73
Example 7-8 : Internal Multi-position control mode
A motor needs to go eight position sections. In position section 0, it should reach the 5000 pulse location at
the speed of 100RPM.In position section 1, it should reach the 15000 pulse location at the speed of
150RPM.In position section 2, it should reach the 28500 pulse location at the speed of 175RPM.In position
section 3, it should reach the -105000 pulse location at the speed of 200RPM. In position section 4, it should
reach the -20680 pulse location at the speed of 300RPM. In position section 5, it should reach the -30550
pulse location at the speed of 325RPM. In position section 6, it should reach the 850 pulse location at the
speed of 275RPM. In position section 7, it should reach the 15000 pulse location at the speed of 460RPM.
Table 7-21 Internal Multi-position Control Mode Demand
DIN1 The driver is enabled, the motor shaft is locked
DIN3 Driver working mode
（
invalid 1
，
valid-3
）
DIN4 Internal position 0
DIN5 Internal position 1
DIN6 Internal position 2
DIN6:DIN5:DIN4=0:0:0 Select position and speed in section 0
DIN6:DIN5:DIN4=0:0:1 Select position and speed in section 1
DIN6:DIN5:DIN4=0:1:0 Select position and speed in section 2
DIN6:DIN5:DIN4=0:1:1 Select position and speed in section 3
DIN6:DIN5:DIN4=1:0:0 Select position and speed in section 4
DIN6:DIN5:DIN4=1:0:1 Select position and speed in section 5
DIN6:DIN5:DIN4=1:1:0 Select position and speed in section 6
DIN6:DIN5:DIN4=1:1:1 Select position and speed in section 7
DIN6
Activate command
（
execute the selected
position section
）
1.
Define the meanings of the input points:
Table 7-22 Internal Multi-position Control Mode Configuration
Numberic
display
Variable name Configuration way
d3.01 Din1_Function 000.1
（
Driver enabled
）
d3.03 Din3_Function 000.4
（
Set driver mode
）
d3.04 Din4_Function 040.0
（
Internal position control 0
）
d3.05 Din5_Function 080.0
（
Internal position control 1
）
d3.06 Din6_Function 800.2 (Internal position control 2)
d3.07 Din7_Function 400.0
（
Activate command
）
d3.16 Din_mode 0
Set 0001
（
1
）
Mode
Internal Multi-position control mode
d3.17 Din_mode 1
Set 0.004 (-4) Mode
Pulse-control mode