Keysight N9927-90001 User’s Guide 343
VVM (Vector Voltmeter) Mode - Option 308
2-Port Transmission Measurements
2-Port Transmission Measurements
A 2-Port Transmission measurement is used for measuring electrical length,
insertion loss, gain, or isolation of a DUT at a single CW frequency. The
FieldFox signal source is transmitted out the port 1 connector, through the
DUT, and into the port 2 connector. In the following image, the gain of an
amplifier is being measured.
Figure 19-3
2-Port Transmission measurement of an amplifier
How to make a 2-Port Transmission Measurement
1.
Press
Mode
then
VVM
then
2-Port Transmission
.
2.
Press
Freq/Dist
and enter the measurement frequency.
3.
Press
Meas Setup 4
then
More
then
Output Power
. Select
High
for passive
devices. Select Low for amplifiers.
4.
Calibrate the FieldFox using one of the methods described in
. Before performing a QuickCal or Mechanical
Cal, press
Meas Setup 4
then
Zero OFF
.
5.
5.Connect the DUT.
Notes:
— The magnitude value is the gain (positive value) or the loss (negative value)
of the DUT.
— The phase value is the difference in phase (in degrees) between the DUT
input and output.
QuickCal is only available on N991xA/2xA/3xA models.
Summary of Contents for N9913A
