Keysight N9927-90001 User’s Guide 137
Calibration for NA, CAT, and VVM Modes
— Press
Meas Setup 4
— Then
Transform
— Then
Transform Settings
— Under
Transform Stimulus Settings
, set the
Start
and
Stop
frequencies to
those of the Waveguide.
— Set
Stimulus = Bandpass Impulse
— Press
Done
— Press
Meas Setup 4
or
Back
— Then
Calibration Settings
— Set
Media = Waveguide
— Set
Cutoff Frequency
. This is the absolute minimum frequency of the
waveguide. This value must be less than the Start Frequency of the
Waveguide.
Enter the calculated
Effective VF
value into the Velocity Factor setting.
Enhanced Response Optimization
When Enhanced Response Cal Type is selected, either for one calibration or for
CalReady, this setting optimizes the calibration based on the type of DUT
being measured. See also: CalReady Properties in
This setting does NOT survive Preset.
— Press
Cal 5
then
More
— Then
Enh.Response
— Then choose from:
—
NonReciprocal
(default) An amplifier is a Non-Reciprocal device
because it has gain in the forward direction, and very high loss
(isolation) in the reverse direction. This choice provides the best
correction for non-reciprocal devices, and reasonable correction for
reciprocal devices.
—
Reciprocal
A reciprocal DUT is a device in which the insertion loss
through the device is equal in both the forward (S21) and reverse
(S12) directions. A cable is a reciprocal device. This choice provides
the best correction for reciprocal devices. However, S11
measurements on non-reciprocal devices will appear to have more
return loss than the non-reciprocal choice.
Summary of Contents for N9913A
