Section 7: TSP command reference
Series 2600B System SourceMeter® Instrument Reference Manual
7-354
2600BS-901-01 Rev. B / May 2013
Example
data = tsplink.readport()
print(data)
Reads state of all three TSP-Link lines.
Assuming line 2 is set high, the output is:
2.00
(binary 010)
The format of the output may vary depending on the
ASCII precision setting.
Also see
TSP-Link synchronization lines
(on page 3-90)
tsplink.readbit()
(on page 7-353)
tsplink.writebit()
(on page 7-364)
tsplink.readbit()
(on page 7-353)
tsplink.writebit()
(on page 7-364)
tsplink.writeport()
(on page 7-365)
tsplink.reset()
This function initializes (resets) all nodes (instruments) in the TSP-Link system. This function is not available on
the Models 2604B/2614B/2634B.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
nodesFound
= tsplink.reset()
nodesFound
= tsplink.reset(
expectedNodes
)
nodesFound
The number of nodes actually found on the system
expectedNodes
The number of nodes expected on the system (1 to 64)
Summary of Contents for System SourceMeter 2601B
Page 841: ......