Series 2600B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2600BS-901-01 Rev. B / May 2013
7-33
Example
timestamp = smua.nvbuffer1.timestamps[1]
Get the timestamp of the first reading stored
in source-measure unit (SMU) A, buffer 1.
Also see
bufferVar.clear()
(on page 7-18)
bufferVar.collecttimestamps
(on page 7-20)
bufferVar.measurefunctions
(on page 7-22)
bufferVar.measureranges
bufferVar.n
(on page 7-24)
bufferVar.readings
(on page 7-25)
bufferVar.sourcefunctions
bufferVar.sourceoutputstates
(on page 7-27)
bufferVar.sourceranges
(on page 7-28)
bufferVar.sourcevalues
(on page 7-29)
bufferVar.statuses
(on page 7-30)
Reading buffers
(on page 3-6)
ConfigPulseIMeasureV()
This KIPulse factory script function configures a current pulse train with a voltage measurement at each point.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in, sync_out, sync_in_timeout, sync_in_abort
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in, sync_out, sync_in_timeout
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in, sync_out
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag, sync_in
)
f
,
msg
= ConfigPulseIMeasureV(
smu, bias, level, limit, ton, toff, points, buffer,
tag
)
f
A Boolean flag; this flag is
true
when the pulse was successfully configured,
false
when
errors were encountered
msg
A string message; if the
f
flag is
false
,
msg
contains an error message; if it is
true
,
msg
contains a string that indicates successful configuration
smu
System SourceMeter
®
instrument channel (for example,
smua
refers to SMU channel A)
bias
Bias level in amperes
level
Pulse level in amperes
limit
Voltage limit (for example, compliance) in volts
ton
Pulse on time in seconds
toff
Pulse off time in seconds
points
Number of pulse-measure cycles
Summary of Contents for System SourceMeter 2601B
Page 841: ......