Keithley System SourceMeter 2601B, Reference Manual

Page: 518 / 864

Section 7: TSP command reference Series 2600B System SourceMeter® Instrument Reference Manual
7-178 2600BS-901-01 Rev. B / May 2013
settimezone()
This function sets the local time zone.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
settimezone( offset )
settimezone( offset , dstOffset , dstStart , dstEnd )
offset String representing offset from UTC
dstOffset
String representing the daylight savings offset from UTC
dstStart String representing when daylight savings time starts
dstEnd String representing when daylight savings time ends
Details
You only need to set the time zone if you use the
os.time()
and
os.date()
functions.
If only one parameter is given, the same time offset is used throughout the year. If four parameters are given,
time is adjusted twice during the year for daylight savings time.
offset
and
dstOffset
are strings of the form
"[+|-]hh[:mm[:ss]]"
that indicate how much time must be
added to the local time to get UTC time:
•
hh
is a number between 0 and 23 that represents hours
•
mm
is a number between 0 and 59 that represents minutes
•
ss
is a number between 0 and 59 that represents seconds
The minute, second, +, and
−
fields are optional.
For example, to set the UTC-5 time zone, you specify the string
"5"
, because UTC-5 is 5 hours behind UTC and
you must add 5 hours to the local time to determine UTC time. To specify the time zone UTC4, you specify
"-
4"
, because UTC4 is 4 hours ahead of UTC and 4 hours must be subtracted from the local time to determine
UTC.
dstStart
and
dstEnd
are strings of the form
"MM.w.dw/hh[:mm[:ss]]"
that indicate when daylight savings
time begins and ends respectively:
•
MM
is a number between 1 and 12 that represents the month
•
w
is a number between 1 and 5 that represents the week in the month
•
dw
is a number between 0 and 6 that represents the day of the week (where 0 is Sunday)
The rest of the fields represent the time of day that the change takes effect:
•
hh
represents hours
•
mm
represents minutes
•
ss
represents seconds
The minutes and seconds fields are optional.
The week of the month and day of the week fields are not specific dates.