Series 2600B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2600BS-901-01 Rev. B / May 2013
7-365
Details
Use
tsplink.writebit()
and
tsplink.writeport()
to control the output state of the trigger line when
trigger operation is set to
tsplink.TRIG_BYPASS
.
If the output line is write-protected by the
tsplink.writeprotect
attribute, this command is ignored.
The reset function does not affect the present states of the TSP-Link trigger lines.
Example
tsplink.writebit(3, 0)
Sets trigger line 3 low (0).
Also see
tsplink.readbit()
(on page 7-353)
tsplink.readport()
(on page 7-353)
tsplink.writeport()
(on page 7-365)
tsplink.writeprotect
(on page 7-366)
tsplink.writeport()
This function writes to all TSP-Link synchronization lines. This function is not available on the Models
2604B/2614B/2634B.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tsplink.writeport(
data
)
data
Value to write to the port (0 to 7)
Details
The binary representation of
data
indicates the output pattern that is written to the I/O port. For example, a data
value of 2 has a binary equivalent of 010. Line 2 is set high (1), and the other two lines are set low (0).
Write-protected lines are not changed.Write-protected lines are not changed.
The
reset()
function does not affect the present states of the trigger lines.
Use the
tsplink.writebit()
and
tsplink.writeport()
commands to control the output state of the
synchronization line when trigger operation is set to
tsplink.TRIG_BYPASS
.Use the
tsplink.writebit()
and
tsplink.writeport()
commands to control the output state of the synchronization line when trigger
operation is set to
tsplink.TRIG_BYPASS
.
Example
tsplink.writeport(3)
Sets the synchronization lines 1 and 2 high (binary 011).
Also see
tsplink.readbit()
(on page 7-353)
tsplink.readbit()
(on page 7-353)
tsplink.readport()
(on page 7-353)
tsplink.writebit()
(on page 7-364)
tsplink.writeprotect
(on page 7-366)
tsplink.writebit()
(on page 7-364)
tsplink.writeprotect
(on page 7-366)
Summary of Contents for System SourceMeter 2601B
Page 841: ......
