![background image](http://html2.mh-extra.com/html/keithley/2308/2308_user-manual_3948247185.webp)
2308-900-01 Rev. A / July 2008
Return to
Section Topics
12-11
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
Section 12: Performance Verification
Figure 12-3
Battery channel connections for 500 mA current verification tests
2. Select the multimeter DC volts measuring function, and enable auto range.
3. Press
the
or keys to select Channel
#1
.
Select the 500 mA readback range and actual
current reading data.
4. Turn on the output.
5. Verify 500 mA range current readback accuracy for the currents listed in
Table 12-6
. For
each test point:
• Set the output current to the correct value, as determined from the digital multimeter voltage
reading and 30
Ω
resistance value.
• Allow the reading to settle.
• Verify that the actual current reading is within the limits given in the table.
NOTE
It may not be possible to set the output current to the exact value. In that case,
set the current to the closest possible value, and modify reading limits
accordingly.
Table 12-6
500 mA range current readback accuracy limits
*
Nominal output
Voltage
Model 2308
output current
**
Current readback limits
(2 Years, 18°C-28°C)
3 V
100.00 mA
0
99.76 to 100.24 mA
6 V
200.00 mA
199.56 to 200.44 mA
9 V
300.00 mA
299.36 to 300.64 mA
12 V
400.00 mA
399.16 to 400.84 mA
*
Check the complete Model 2308 Specifications at
www.keithley.com
for
updated current readback accuracy limits before verification.
**As measured by digital multimeter and 30
Ω
resistance value.
WARNING:
NO INTERNAL OPERATOR SERVICABLE PARTS,SERVICE BY QUALIFIED PERSONNEL ONLY.
CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,REPLACE FUSE WITH SAME TYPE AND RATING.
MADE IN
U.S.A.
LINE RATING
100-120VAC, 200-240VAC
50, 60 HZ 165VA MAX
LINE FUSE
SLOWBLOW
2.0A, 250V
IEEE-488
(ENTER IEEE ADDRESS
FROM FRONT PANEL MENU)
REMOTE
DISPLAY
OPTION
+
+
+ _
_ _
SOURCE
SENSE
SOURCE
OUTPUT #1
ISOLATION FROM EARTH: 22 VOLTS MAX MAX.
RELAY
CONTROL
24VDC MAX
DVM IN
-30 VDC MAX
ANALOG
OUT
mA
(5/50)
A
(0.5/5)
+
+
+ _
_ _
_
+
SOURCE
SENSE
DVM IN
SOURCE
OUTPUT #2
NEXT
PREV
POWER
DISPLAY
2001
MULTIMETER
DCV
ACV
DCI
ACI
ý2
ý4
FREQ
TEMP
REL
TRIG
INFO LOCAL
EXITENT
ER
RANGE
RANGE
!
F
R
500V
PEAK
FRONT/REAR
2A 250V
AMPS
CAL
STORE RECALL
CHAN SCAN
FILTER MATH
CONFIG MENU
HI
INPUT
LO
SENSE
ý 4 WIRE
INPUTS
350V
PEAK
1100V
PEAK
AUTO
Model 2001 DMM
Model 2308
Input LO
Input HI
Source -
30
W
Resistor
Note: Use 4-wire connections
to resistor terminals.
Sense -
Sense +
▲
▲
Summary of Contents for 2308
