2308-900-01 Rev. A / July 2008
Return to
Section Topics
5-5
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
Section 5: Relay Control
6. Repeat steps 2 and 3 to set the relays as desired.
7. Save the changes for all four relays (press the
ENTER
key located on the front panel).
All relays open (sample)
OUTPUT RELAYS
1:0 2:0 3:0 4:0
Relays 1 and 2 closed and 3 and 4 open (sample).
OUTPUT RELAYS
1:1 2:1 3:0 4:0
SCPI programming
Table 5-2
summarizes output relay command controls.
NOTE
To cancel changes made, press the
MENU
key (this sets the instrument back to
the last saved changes). Changes must be canceled before pressing
ENTER
.
Table 5-2
SCPI command - output relay control
Command
Description
Default
OUTPut[1]
OUTPut subsystem from battery channel (#1):
:RELay1 <name>
Close (1) or open (0) relay control circuit
for relay 1.
ZERO
:RELay2 <name>
Close (1) or open (0) relay control circuit
for relay 2.
ZERO
:RELay3 <name>
Close (1) or open (0) relay control circuit
for relay 3.
ZERO
:RELay4 <name>
Close (1) or open (0) relay control circuit
for relay 4.
ZERO
Summary of Contents for 2308
