![background image](http://html2.mh-extra.com/html/keithley/2308/2308_user-manual_3948247206.webp)
13-16
Return to
Section Topics
2308-900-01 Rev. A / July 2008
Section 13: Calibration
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
Changing the code from the front panel
Follow the steps below to change the code from the front panel:
1. Press
the
MENU
key, then choose
CALIBRATE UNIT
, and press
ENTER
. The instrument
will display the last date calibrated:
CALIBRATE UNIT
LAST ON 07/01/2008
2. Press
the
▲
key. The instrument will display the number of times it was calibrated:
CALIBRATE UNIT
TIMES = 1
3. Press
the
▲
key. The unit will then prompt you to run calibration:
CALIBRATE UNIT
RUN
4. Press
ENTER
. The unit will then prompt for the calibration code:
CALIBRATE UNIT
Cal Code KI002308
5. Using the edit keys, set the display to the current present calibration code then press
ENTER
(default: KI002308). The unit will prompt you as to whether or not to change the
code:
CALIBRATE UNIT
Change Code NO
6. Select YES then press
ENTER
. The instrument will prompt you to change the code:
CALIBRATE UNIT
New Code: KI002308
7. Use the edit keys to set the new code then press
ENTER
to accept the new code.
8. Press
the
MENU
key to exit calibration and return to the main menu.
Changing the code by remote
To change the calibration code by remote, first send the present code, then send the new code.
For example, the following command sequence changes the code from the 'KI002308' remote
default to 'KI_CAL':
:CAL:PROT:CODE 'KI002308'
:CAL:PROT:CODE 'KI_CAL'
Use any combination of letters and numbers up to a maximum of eight characters.
Resetting the calibration code
If you forget the calibration code, you can reset the code by sending the following bus command:
CALibration:PROTected:CODE:RESET
. This command will change and save the password to
the default setting of "KI002308". The following message appears briefly on the front panel while
this command is being processed:
SAVED NEW
CALIBRATION CODE
Once, the command is processed, you may unlock calibration using "KI002308" as the code. If
you want to change this code then, see
Changing the calibration code
.
Summary of Contents for 2308
