background image

502-2 & 503-2   instructions

instruction manual

mastervolt.com

  

EasyCharge Chargers 

MODELS:  43310600, 43321000

The Mastervolt chargers are designed to both recharge your batteries, and extend 

your battery’s life in applications where it is stored for long periods of time. They are 

multi-stage, completely automatic, lightweight, silent, battery chargers and each 

output produces 12 Volts DC at either a full 5 or 6 Amps (model specific), while using 

much less AC current than other charger types. When the charger is attached to your 

batteries and plugged into a standard 230 Volt / 50 Hz AC outlet, the red and green 

LED’s let you know the unit is recharging and maintaining your batteries. Model 

43321000 uses Sense-Send Technology to quickly charge two batteries and will 

automatically start charging when the battery voltage becomes low.

WARNING THIS CHARGER SHOULD BE USED TO CHARGE ONLY LEAD ACID OR 

AGM TYPE BATTERIES. USE ON OTHER BATTERY TYPES MAY EXPLODE AND CAUSE 

PERSONAL INJURY.

BATTERY CHARGERS

Models

Amperage

No. Of Banks

Volts

43310600

6 Amps

1 Banks

12

43321000

5/5 Amps

2 Banks

12/24

Summary of Contents for 43310600








Reviews: