![background image](http://html2.mh-extra.com/html/keithley/2308/2308_user-manual_3948247166.webp)
11-8
Return to
Section Topics
2308-900-01 Rev. A / July 2008
Section 11: SCPI Tables
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
:LENgth <NRf>
Define the delay sequence length (0 to 19).
Specify zero to always use the PCUR:STEP:DELay
value.
0
:SKIP <b>
Specify whether (1) or not (0) to skip sequential
triggers.
1=Only requires 1 trigger
0 = Requires multiple triggers
0
:DELay?
Query setting for step delay.
:TLEVx <NRf>
Set trigger level for each TLEV step (
x
equals
1–20) (the maximum settings are based on the
selected current range. Therefore, the current range
must be selected before setting the step trigger level
values) .
0.0
:TLEVx?
Query setting for trigger level for each TLEV
step (
x
equals 1–20).
:SYNChronize
Pulse detection triggering:
[:STATe] <b>
Send ON to select pulse current measurements
or OFF to select pulse current digitization.
ON
[:STATe]?
Query pulse current measurement type.
:TLEVel
Trigger level:
[:AMP] <NRf>
Set the trigger level in amps for use when on the
5 A current range: 0.0 A-5.0 A in 5 mA steps.
0.0
[:AMP]?
Query setting for trigger level in amps for use
when on the 5 A current range.
:HUNDred <NRf>
Set the trigger level in amps for use when on the
500 mA current range: 0.0 mA-500 mA in 0.5 mA or
500
μ
A steps.
0.0
:HUNDred?
Query setting for trigger level in amps for use
when on the 500 mA current range.
:FIFTy <NRf>
Set the trigger level in amps for use when on the
50 mA current range: 0.0 mA-50 mA in 0.05 mA or
50
μ
A steps
0.0
:FIFTy?
Query setting for trigger level in amps for use
when on the 50 mA current range.
:FIVE <NRf>
Set the trigger level in amps for use when on the
5 mA current range: 0.0 mA-5 mA in 0.005 mA or
5
μ
A steps.
0.0
:FIVE?
Query setting for trigger level in amps for use on
the 5 mA current range.
:DELay <NRf>
Specify trigger delay in seconds:
0.0–0.1 (pulse current measurements) or
0.0–5.0 (pulse current digitization).
0.0
:DELay?
Query specified trigger delay (dependent on
SYNC:STAT).
Table 11-4
SENSe command summary (refer to
Table 2-3
,
Table 3-2
, and
Table 4-2
)
Command
Description
Default
parameter SCPI
*
No query or short form exists.
Summary of Contents for 2308
