2308-900-01 Rev. A / July 2008
Return to
Section Topics
11-13
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
Section 11: SCPI Tables
SOURce command summary
Table 11-5
SOURce command summary (refer to
Table 2-3
)
Command
Description
Default
parameter SCPI
[:SOURce[1]]
SOURce subsystem for battery channel (#1).
:VOLTage
Path to set output voltage.
✓
:PROTection <NRf>
Sets VPT offset (0–8V).
8V
:PROTection?
Query setting for VPT offset.
:STATe?
Query state of VPT - no associated
command.
:CLAMp <b>
Sets VPT clamp mode ON or OFF.
OFF
:CLAMp?
Query state of VPT clamp mode.
[:LEVel]
✓
[:IMMediate]
[:AMPLitude] <n>
Specify voltage amplitude in volts: 0–15V
with 1mV resolution.
0.0
✓
[:AMPLitude]?
Query voltage amplitude.
✓
:CURRent
Path to configure current.
✓
[:LIMit]
Path to configure current limit.
[:VALue] <NRf>
Specify current limit value in amps: 0.006–5
with 100
μ
A resolution.
0.25
[:VALue]?
Query current limit.
:TYPE <name>
Select current limit type: LIMit or TRIP.
LIM
:TYPE?
Query current limit type.
:STATe?
Query state of current limit: 1 = in current limit
(for LIMit type) or output tripped (for TRIP
type), 0 = not in LIMit/TRIP.
:SOURce2
SOURce subsystem for channel #2 (charger
channel).
:VOLTage
Path to set output voltage.
✓
:PROTection <NRf>
Sets VPT offset (0–8V).
8V
:PROTection?
Query setting for VPT offset.
:STATe?
Query state of VPT - no associated
command.
:CLAMp <b>
Sets VPT clamp mode ON or OFF.
OFF
:CLAMp?
Query state of VPT clamp mode.
[:LEVel]
✓
[:IMMediate]
[:AMPLitude] <n>
Specify voltage amplitude in volts: 0–15
with 1mV resolution.
0.0
✓
Summary of Contents for 2308
