HALO POWER CUBE 10000
Thank you for choosing HALO. The POWER CUBE 10000 is the
best of both worlds. It combines the on-the-go appeal of the
original HALO portable charger, with a versatile design that
can be recharged just about anywhere, and anytime. Simply
charge your power cube in a wall outlet or car charging port,
and it's ready to provide power on the go to your small
electronics. Equipped with 10000 mAh and dual USB.
Includes the Micro USB cable and USB Type C cable.
Please read the operating instructions carefully before using
the HALO POWER CUBE 10000.
INCLUDED ITEMS
- HALO POWER CUBE 10000
- Micro USB Cable
- USB C Cable
1
| Wall Charging Plug
2
| Car Charging Plug
3
| LCD Digital Display
4
| USB Power ON/OFF Button
5
| 2x USB Output Ports
OPERATING INSTRUCTIONS
CHARGING YOUR HALO POWER CUBE 10000
IMPORTANT: Before using your HALO POWER CUBE 10000 for
the first time, fully charge it .
To charge your HALO POWER CUBE 10000, pull out the AC
prongs & connect to a wall outlet. When you’re on the road,
you can also use the car charging plug to charge your HALO
POWER CUBE 10000.
While charging, the LCD Digital Display will illuminate
indicating the charge percentage.
HALO POWER CUBE 10000 LCD DIGITAL DISPLAY
While charging, the digital screen will illustrate the charge
percentage of the HALO POWER CUBE 10000. When fully
charged, disconnect from charging.
CHARGING YOUR PERSONAL ELECTRONIC
DEVICE
Charge up to two electronic devices using the supplied Micro
USB Cable or USB C Cable. Plug the USB connector into the
HALO POWER CUBE 10000. Insert the tip into your personal
electronic device and charging will begin automatically. You
may also use your own USB cable that was supplied with your
personal electronic device.
Note: To charge both the HALO POWER CUBE 10000 and your
personal electronic device, first plug the HALO POWER CUBE
10000 into either a wall outlet or car outlet. Using any
Standard USB Cable, connect your personal electronic device
to the HALO POWER CUBE 10000 and your personal electronic
device will automatically begin to charge. Once your personal
electronic device is fully charged, the HALO POWER CUBE
10000 will then begin to charge itself.
SPECIFICATIONS
Battery Capacity:
10000mAh
USB Output 1:
5V/2.1A
USB Output 2:
5V/2.1A
Rated AC Input:
100V~240V, 50/60 Hz
Rated DC Input:
12V~24V
Dimensions (W x H x D):
2.75 x 2.75 x 1.57 inches
Weight:
0.4 lbs
Working Temperature (charging):
32° F to 113° F
Working Temperature (discharging):
14° F to 131° F
Working Humidity:
Max 75%
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose power bank to rain or snow.
• Use of a power supply or charger not recommended or sold
by power pack manufacturer may result in a risk of fire or
injury to persons.
• Do not use the power bank in excess of its output rating.
Overload outputs above rating may result in a risk of fire or
injury to persons.
• Do not use the power bank that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
• Do not disassemble the power bank. Take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or injury to persons.
• Do not expose a power pack to fire or excessive
temperature. Exposure to fire or temperature above 100°C
may cause explosion. The temperature of 100°C can be
replaced by the temperature of 212°F.
• Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
• Switch off the power bank when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, fire or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner at your local battery-recycling
center.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations in this operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from unintended
use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you find that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and contact
Manufacturer.
• Never dispose of batteries in the garbage. Disposal of
batteries in the garbage is unlawful under state and federal
environmental laws and regulations. Always take used
batteries to your local battery-recycling center.
• Switch off the portable battery when not in use. The
portable battery will automatically switch off when
disconnected from a device.
• This device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and
RSS-Gen of IC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
P O W E R C U B E
1 0 0 0 0
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device must
be used with certified peripherals and shielded cables. All
peripherals must be shielded and grounded. Operation with
non-certified peripherals or non-shielded cables may result in
interference to radio or reception.
MODIFICATION: Any changes or modifications of this device
could void the warranty.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this
product in conjunction with any device or accessory other
than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suffer as a result of
misuse of this product as outlined above. Purchaser agrees to
defend, indemnify, and hold Manufacturer harmless for any
claims or damages arising from unintended use or misuse,
including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal use.
Conditions are as follows:
• During the first 90 days from date of purchase, HALO will
repair or replace the defective product.
• HALO will, subject to inspection, repair the defective
product or replace it with a new or reconditioned unit. The
return must be accompanied by a Return Merchandise
Authorization (RMA) number to be issued upon request, and
must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment
that is used, or incorporates with any of our products and
accessories. HALO shall not be held responsible for the
improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of
HALO’s products.
For all questions or exchange requests, please call
888-907-6274, or contact us at zagg.com/support.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and fitness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or losses
of or to electronic equipment or products that are used with
any of HALO’s products.
