9-12
Return to
Section Topics
2308-900-01 Rev. A / July 2008
Section 9: Measurement Commands and Optimizing Measurement Speed
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
Keep talking the power supply for readings
If after taking readings and desire to make a change in configuration then...
SYST:TRIG:CONT 0
// Disable Continuous Trigger Mode before changing other settings. This turns
// display ON.
Send commands here to make the desired system change.
SYST:TRIG:CONT 1
// Enable Continuous Trigger Mode which turns display OFF.
*OPC?
// Query the power supply for when done processing the commands to configure
// the instrument for desired measurements
Talk the power supply to get the ASCII one response back for *OPC?
Resume talking and taking power supply readings in continuous trigger mode.
Table 9-4
Trigger continuous mode programming example
Command
Description
Summary of Contents for 2308
