![background image](http://html2.mh-extra.com/html/keithley/2308/2308_user-manual_3948247116.webp)
6-10
Return to
Section Topics
2308-900-01 Rev. A / July 2008
Section 6: GPIB Operation
Model 2308 Portable Device Battery/Charger Simulator User’s Manual
:STATus
Path (Root)
:OPERation
Path
:ENABle <NRf>
Command and parameter
:ENABle?
Query command
:PRESet
Command
Single command messages
The previous command structure has three levels. The first level is made up of the root command
(
:STATus
) and serves as a path. The second level is made up of another path (:
OPERation
)
and a command (
:PRESet)
. The third path is made up of one command for the
:OPERation
path. The three commands in this structure can be executed by sending three separate program
messages as follows:
:stat:oper:enab <NRf>
:stat:oper:enab?
:stat:pres
In each of the above program messages, the path pointer starts at the root command (
:stat
) and
moves down the command levels until the command is executed.
Multiple command messages
You can send multiple command messages in the same program message as long as they are
separated by semicolons (;). Here is an example showing two commands in one program
message:
:stat:pres; :stat:oper:enab <NRf>
When this command is sent, the first command word is recognized as the root command (
:stat
).
When the next colon is detected, the path pointer moves down to the next command level and
executes the command. When the path pointer sees the colon after the semicolon (;), it resets
back to the root level and starts over.
Commands that are on the same command level can be executed without having to retype the
entire command path. Example:
:stat:oper:enab <NRf>; enab?
After the first command (:enab) is executed, the path pointer is at the third command level in the
structure. Since
:enab?
is also on the third level, it can be typed in without repeating the entire
path name. Notice that the leading colon for
:enab?
is not included in the program message. If a
colon were included, the path pointer would reset to the root level and expect a root command.
Since :enab? is not a root command, an error would occur.
Command path rules
• Each new program message must begin with the root command, unless it is optional (e.g.,
[
:SOURce1
]). If the root is optional, treat a command word on the next level as the root.
• The colon (:) at the beginning of a program message is optional and need not be used.
Example:
:stat:pres = stat:pres
• When the path pointer detects a colon (:), it moves down to the next command level. An
exception is when the path pointer detects a semicolon (;), which is used to separate
commands within the program message (see next rule).
• When the path pointer detects a colon (:) that immediately follows a semicolon (;), it resets
back to the root level.
Summary of Contents for 2308
