JUKI SC-956, Instruction Manual

Page: 161 / 185

– 156 –
❷
A B
❻
❼
❺ ❸ ❹
❻
<New condensation custom pattern creation pattern number
input screen>
③
Inputting the condensation custom number
1) Enter the pattern number with numeric
keypad ❸ .
An unassigned registration number
that is closest to the entered value in
the plus/minus direction is displayed by
pressing
❹ .
2) Press
❺
.
The "condensation custom edit screen"
is displayed.
In the case the entered number has
already been registered, the prompt
message for overwrite confirmation is
displayed.
② Selecting the new condensation custom creating function
1) Registered condensation custom pat-
terns are displayed on the screen.
Press ❷ .
The "new condensation custom pattern
creation pattern number input screen"
is displayed.
<Condensation custom pattern list screen>
Stitch length
<Condensation custom edit screen>
④ Creating a condensation custom
1) Press ❻ to put the step you have
pressed in the selected state.
2) The selected condensation custom
number is displayed in A and the step
number which is being edited, and the
total number of steps are displayed in
B .
3) The "number of stitches" and "stitch
length" for the step are displayed in ❻ .
Press ❻ to put the displayed data in
the selected state.
Previous step number screen or the
next step number screen is displayed
with
❼
.
4) "Condensation custom data input
screen" is displayed by pressing ❻
while the step is being selected.
Number of stitches