JUKI SC-956, Instruction Manual

Page: 141 / 185

– 136 –
Step changeover reference
Number of stitch-
es
Hand switch
Multi-layered part
detection
Separately-driven
needle bar sensor
Stop - Presser foot
lifting
○ ○ ○ ○
Stop - Presser foot
lifting height
○ ○ ○ ○
One shot ○ ○ ○ ○
Sewing speed limit ○ ○ ○ ○
Automatic return to
both-needle operation
mode in the case of
step feed
○ ○ ○ ○
<Sewing adjustment mode screen>
6) When is pressed, the "sew-
ing adjustment mode screen" is dis-
played.
To set the sewing data under the
sewing adjustment mode, Refer to
"5-
2-5. Editing the sewing patterns (2)
Sewing adjustment mode" p.53
.
<Teaching input screen (in the case the step changeover ba -
sis is the number of stitches or the separately-driven needle
bar changeover)>
7) When ❾ is pressed, the "teach-
ing input screen" is displayed.
In the case the step changeover basis
is the number of stitches or the sepa-
rately-driven needle bar changeover,
the input value
A of the number of
stitches becomes 0 (zero).
Depress the pedal to run the sewing
machine. Count the number of stitches
the sewing machine produces until it
stops.
A