– 121 –
2. Set a "threshold" for the multi-layered section detection.
1) Press
❻
.
"Multi-layered section changeover function ON sensor value screen" is displayed.
(For the "threshold" for turning OFF the multi-layered section changeover function, press
❺
and set the threshold in the same manner as described below.)
<Multi-layered section changeover function ON
sensor value screen>
2) Press
❼
.
“Multi-layered section changeover func-
tion ON sensor value teaching screen”
is displayed.
<Multi-layered portion sewing parameter list screen>
4) Select enable/disable of the multi-lay-
ered part detection by pressing
❸
.
5)
❹
to confirm the setting. Then, the
sewing data edit screen is displayed.
Set the "threshold" for ON/OFF of the
multi-layered section detection.
* For the purpose of the multi-layered
section detection function, the word
"threshold" means the value at which
the multi-layered section sensor reacts.
MAX : 3000
MIN : 1000
3) Place the normal section of material under the presser foot, and press
❽
.
Lift the presser foot by depressing the back part of pedal.
<Multi-layered section changeover function ON
sensor value teaching screen>
❼
❽
❹
❻
❺
❸
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
