– 35 –
Function item
i00 Without option input function
i01 Needle up / down correction stitch
i02 Thread trimming function
i03 1-stitch correction stitch
i04 Needle lifting function
i05 Safety switch input
i06 Function for cancelling reverse feed stitching once
at the end of sewing
i07 Cancellation / addition of automatic reverse feed
stitching
i08 Sewing counter input
i09 Half-pitch correction stitch
i10 One-touch type changeover switch
[Description of operations of the custom switch]
Function item
i51 Reverse-feed correction stitch
i52 Presser foot lifting function
i53 Function for cancelling reverse feed stitching at the
beginning of sewing
i54 Function for prohibiting depress on the front part of
pedal
i55 Function for prohibiting thread trimming output
i56 Low-speed command input
i57 High-speed command input
i58 Reverse feed stitching switch input
i59 Sewing limit for the soft-start sewing
i60 One-shot stitching speed command
i61 Reverse-feed one-shot stitching speed command
4-9. Adjusting the amount of oil (oil splashes) in the hook
4-9-1. Adjusting the amount of oil in the hook
1) Detach bed slides (right and left)
❶
.
2) The amount of oil in the hook is decreased
by turning screw
❷
clockwise
A
or is in-
creased by turning it counterclockwise
B
.
❶
❷
❷
A
B
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
