JUKI SC-956, Instruction Manual

Page: 136 / 185

– 131 –
9-1-2. Copying a pattern
2) Select the copy source pattern number
from list
❷
.
3) Press ❸ .
The "sewing pattern number copy
screen" is displayed.
The selected pattern (sewing pattern and cycle pattern) can be copied to any other pattern of the speci-
fied number.
* This operation is to be carried out under the maintenance personnel mode.
Explanation is given below using copying of a sewing pattern as an example.
① Selecting the sewing pattern copy function
1) Press ❶ on the sewing screen
under the maintenance personnel
mode.
The "sewing pattern number list screen"
is displayed.
<Sewing screen (Maintenance personnel mode)>
<Sewing pattern number list screen>
1) Enter the sewing pattern number to be
registered using numeric keypad ❹ .
An unassigned registration number
that is closest to the entered value in
the plus/minus direction is displayed by
pressing
❺ .
2) The created pattern is registered by
pressing ❻ . Then, the current
screen returns to the "sewing pattern
number list screen". In the case the
entered number has already been reg-
istered, the prompt message for over-
write confirmation is displayed.
②
Select the copy destination pattern number
❹ ❺
❻
<Sewing pattern number copy screen>
❸ ❷
❶