– 123 –
3. Setting the sewing parameters to be
used when a multi-layered portion of
material is detected
1) Press
❶
.
The "Multi-layered portion run-on set-
ting list screen" is displayed.
2) Setting the sewing parameters to be
used when the sewing machine running
on a multi-layered portion of material.
: Stitch length
: Presser foot pressure
: Needle thread tension (left)
: Needle thread tension (right)
: Number of stitches to be sewn
before running on the multi-lay-
ered portion of material
3) Stitch length can be input by pressing
❷
.
Enter the stitch length with
❸
.
4) Similarly, input the presser foot pres-
sure, needle thread tension (left) and
needle thread tension (right).
3) When you press
❹
, the values
you have entered are confirmed and
the screen returns to the "Multi-layered
portion sewing parameter list screen".
* Refer to
layered portion changeover timing
according to the number of stitches"
for the number of stitches to be
sewn before running on the multi-lay-
ered portion of material.
<Multi-layered portion sewing parameter list screen>
<Multi-layered portion run-on setting list screen>
❶
❸
❷
❹
❺
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
