JUKI SC-956, Instruction Manual

Page: 49 / 185

– 44 –
5-2-3. Reverse feed stitching (at start) pattern
A stitch shape of the reverse feed stitching (at start) is set by following the steps of procedure described
below.
(1) Enabling the reverse feed stitching (at start) pattern
① Displaying the edit screen for reverse feed stitching (at start)
Keep ❶ held pressed for one sec-
ond. The reverse feed stitching (at start) edit
screen is displayed.
② Setting the number of stitches and the number of repetitions of reverse feed stitching at
the beginning of sewing
Change the number of reverse feed stitches
with ❷ .
The value you have entered is confirmed by
pressing
❸
. Then, the sewing screen
is displayed.
<Edit screen for reverse feed stitching
(start) (operator mode)>
The sewing-start reverse feed stitching pat-
tern can be operated when the sewing-start
reverse feed stitching function is placed in
the ON state
mark is not displayed).
If this function is placed in the OFF state,
press the sewing start reverse feed stitch
button to switch off mark display to en-
able the sewing-start reverse feed stitching
function.
(2) Changing the number of stitches and pitch of reverse feed stitching (at start) pattern
♦ In the case of operator mode
❶
❸ ❷ ❷