– 166 –
9-9-3. NFC
The operation panel supports NFC (Near Field Communication).
Sewing data, maintenance information or the like can be viewed, edited, copied, etc., on an Android
terminal (such as tablet and smartphone) on which JUKI application for Android "JUKI Smart App" has
been installed, by means of the NFC communication function.
Refer to the Instruction Manual for JUKI Smart App for details of JUKI application for Android "JUKI
Smart App".
①
Position of the NFC antenna
[Position of the NFC antenna]
To conduct the NFC (near field communi
-
cation) between the sewing machine and
the tablet or smartphone, bring the tablet
or smartphone to NFC mark
❶
on the op-
eration panel as illustrated in Fig. 2, and
hold it there until the data is displayed.
* If the NFC communication has failed,
error message will be displayed on
the tablet/smartphone screen.
When the error message is displayed on
the screen, carry out the NFC communi-
cation again.
<Fig.1>
<Fig.2>
②
Precautions to be taken when handling NFC
・
The position of the NFC antenna varies according to the tablet/smartphone used.
Be sure to read the instruction manual of your device before using the NFC communication
function.
・
To use the NFC communication function, place the NFC communication function setting in "En-
able" while Refer to the instruction manual for your tablet/smartphone.
・
If you use the NFC while the main body of sewing machine is being started, a malfunction can
occur.
❶
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
