JUKI SC-956, Instruction Manual

Page: 89 / 185

– 84 –
Error
code
Description of error Cause Item to be checked
E205 ISS buffer capacity
runout warning
・ Buffer for storing ISS data will soon
be filled to its capacity.
If the buffer is used continuously,
the stored data will be automatical-
ly erased on FIFO basis.
・ Output the ISS data.
E220 Warning against short-
age of grease ・ When the predetermined number
of stitches is reached.
・ Add grease to the specified points of sew -
ing machine and reset the error.
E221 Grease-shortage error ・ In the case the sewing machine
cannot continue sewing since the
predetermined number of stitches
is reached.
・ Add grease to the specified points of sew -
ing machine and reset the error.
E302 Head-tilt detection error
(When the safety switch
operates) ・ In the case the Tilt detection switch
is turned ON when the power to
the sewing machine remains ON.
・ Check whether the machine head is tilted
before turning OFF the power switch (The
sewing machine operation is prohibited for
the sake of safety.)
E303 Meniscus sensor error
・
In the case the meniscus sensor
signal cannot be detected.
・
Check for a break in the motor encoder
connector.
E402 Deletion disabled error ・ In the case of attempting to delete
the pattern which is used in a cycle
pattern.
・
In the case of attempting to delete
the custom pitch or condensation
custom which is used in a pattern.
E407 Wrong password ・ In the case the password entered
is wrong.
E408 Shortage of number of
password characters ・ In the case the number of pass-
word characters entered is not
enough.
E411 Polygonal stitching pat-
tern registration disabled
error ・ In the case of attempting to create
eleven or more polygonal stitching
patterns.
E412 Custom pitch unregis-
tered error ・ In the case the custom pitch num-
ber is faulty.
E413 Condensation custom
unregistered error
・
In the case the condensation cus-
tom number is faulty.
E414 File name duplication
error ・ In the case of file name that al -
ready exists.
E417 Keylock reset error ・ In the case the keylock could not
be released.
E499 Simplified program fault
E704 Data failure (system-ver-
sion mismatch) ・ In the case the system version
does not match the machine head
setting.
・ Re-write the system version to the applica-
ble one.
E706 Operation panel fault
E707 NAND flash memory
format error
・ The NAND flash memory is not
formatted.
E708 NAND flash memory
access error
・ The NAND flash memory is not
accessible.
E730 Encoder fault