– 158 –
9-5-3. Condensation custom edit function
①
Selecting the condensation custom edit function
Display the "Condensation custom pattern
list screen" Refer to
.
<Condensation custom edit screen>
②
Editing the condensation custom value
In this section, procedure for editing the condensation custom value is described.
Refer to
"9-5-2. Creating a new condensation custom"p.155
for the explanation of screen.
1) In the case of setting the number of stitches
The number of stitches can be input in the range from 1 to 100.
Change the number of stitches for step 1 using the numeric keypad and
or the num-
ber of stitches.
Press
to confirm the setting.
2) In the case of setting the stitch length
Possible input range is same as that of "S003 Stitch length".
Change the stitch length for step 1 using the numeric keypad and
the stitch length.
Press
to confirm the setting.
* A negative number of stitches can also be set. In this case, the direction of feed is reverse direc-
tion.
3) Change the settings for each step in the same manner as described above.
Steps of procedure to be taken after the aforementioned step are same as those described in
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
